Polyurethane Resin, Foam Decorative millwork For casting statuary, home decor items, ornamental moldings, and decorative millwork. Silicone rubbers work very well for polyurethane resin and foam casting, capture excellent surface detail, offer exceptional dimensional stability and have unmatched lifetime and durability Previous Next Recommended options Edit Table
Tin Cure Silicone for Mold T-Flow series
T-Flow series Tin Cure Silicone for Mold is a general-purpose RTV silicone rubber which exhibits excellent tear strength, long library life, and accurate detail reproduction.
T-Flow series Tin cure silicone for mold is a condensation cured silicone (tin catalyzed ) It is used to make rubber molds that can be used to cast polyurethanes, epoxy’s, polyester’s, cement, concrete, soap, wax, plaster, etc..
It is easy to mix and de-air, and will cure at room temperature over virtually any surface. T-Flow Series Tin cure silicone for mold is extremely useful for applications where superior physical properties are required.
Vacuum degassing mixed material using a vacuum pump and chamber to remove entrapped air is recommended.
Features of T-Flow series Silicone for Mold
- High flowability, pourable
- High strength
- High elasticity, for easy removal of, complex replica parts
- Less shrinkage
- Outstanding release properties
Typical Uses & Casting Materials
T-Flow series Silicone for Mold is designed for molding polyurethanes, polyester resins, plasters, waxes, soaps, paraffin, gypsum, concrete, liquid plastics, as well as for the production of souvenirs, sculptures, figurines and other handicrafts
Viscosity testing of T-Flow series Silicone for Mold
Tear strength testing of T-Flow series Silicone for Mold
- Stir Part A well before use, shake Part B catalyst container well before use.
- Weigh 100 Part A to 2~3 Part B using an accurate scale and a clean mixing container.
- Vigorously mix and scrape walls of the container, continue mixing until uniform.
- Place the mixture in a vacuum chamber & degass. If without a chamber, Pour the mixture 2-3 inches above the pattern in a thin stream.
- Allow the silicone to cure 2-4 hours and demold with care.
- Before use, read the operation manual, please.
- Before large production, a small-scale test is recommended.
- Mixing ratio must be accurate, recommend mixing ratio is A:B=100:2~3(by weight), If curing too fast, please reduce the ratio of catalyst to 1% or less, then Stir Part A and Part B completely.
- Use a vacuum to de-gas this product before use under pressure. Vacuum silicone for 2-3 minutes
- This product has a limited shelf life. Use it as soon as possible after opening.
- Always tightly reseal containers after use. Air, moisture or other contamination causes a reduction in reactivity over time.
Storage & shelf-life
12 months in unopened containers when properly stored.
Super-Silicon cannot guarantee the shelf life of opened or repackaged units.
Recommended storage temperature range: 10°C – 25°C. SuperSilicon™ should be stored in closed containers out of direct sunlight and away from direct sources of heat. Always tightly reseal containers after use. Air, moisture or other contamination causes a reduction in reactivity over time.
|Thickening agent||For Thickening silicone for brushable application|
|Fumed silica||A fine powder that can be added to polyurethane and silicone liquid rubber to thicken them for brush-on/lay-up applications.|
|Tin Cure Silicone Accelerator||For speed up curing time|
|Heat resistance additive||For resisting chemical/heat burnout|
|Pigments||For coloring silicone|
|Fabric||Reinforcement Material for silicone molds|
Crafts, Foundry & Figurines Do-It-Yourself craft and hobby projects can be completed with the help of molding and casting materials. Any decorative object (e.g., resin jewelry, model trains, custom tiles, small figurines, wall art, much more) can be molded using silicone mold rubber and then replicated in any number of materials, including plastic, concrete, plaster,
Candle Making Silicone rubbers are used to cast candles of many shapes, sizes, and textures. Platinum-cured silicone and tin-cured silicone rubbers are recommended when making beeswax and soy-based candles because of their excellent release properties. The release agent is not required when casting these types of waxes in silicone molds. Previous Next Recommended options Edit
Soap Making For soap products with deep textures and intricate designs, liquid silicone mold rubbers are often the mold material of choice because of their flexibility and excellent release properties. Platinum-cured silicones that are recommended when making soap molds because of their excellent release properties. The release agent is generally not required when casting soap