Tin Cure Silicone for Mold T-Flow series

T-Flow series Tin Cure Silicone for Mold is a general-purpose RTV silicone rubber which exhibits excellent tear strength, long library life, and accurate detail reproduction. 

T-Flow series Tin cure silicone for mold is a condensation cured silicone (tin catalyzed ) It is used to make rubber molds that can be used to cast polyurethanes, epoxy’s, polyester’s, cement, concrete, soap, wax, plaster, etc.. 

It is easy to mix and de-air, and will cure at room temperature over virtually any surface. T-Flow Series Tin cure silicone for mold is extremely useful for applications where superior physical properties are required.

Vacuum degassing mixed material using a vacuum pump and chamber to remove entrapped air is recommended.

Tin cure silicone for mold

Features of T-Flow series Silicone for Mold

  • High flowability, pourable
  • High strength
  • High elasticity, for easy removal of, complex replica parts
  • Less shrinkage
  • Outstanding release properties
Tin cure silicone for mold 2

Typical Uses & Casting Materials

T-Flow series Silicone for Mold is designed for molding polyurethanes, polyester resins, plasters, waxes, soaps, paraffin, gypsum, concrete, liquid plastics, as well as for the production of souvenirs, sculptures, figurines and other handicrafts

Viscosity testing of T-Flow series Silicone for Mold

Tear strength testing of T-Flow series Silicone for Mold

Instruction

  1. Stir Part A well before use, shake Part B catalyst container well before use.
  2. Weigh 100 Part A to 2~3 Part B using an accurate scale and a clean mixing container.
  3. Vigorously mix and scrape walls of the container, continue mixing until uniform.
  4. Place the mixture in a vacuum chamber & degass. If without a chamber, Pour the mixture 2-3 inches above the pattern in a thin stream.
  5. Allow the silicone to cure 2-4 hours and demold with care.

Important tips

  • Before use, read the operation manual, please.
  • Before large production, a small-scale test is recommended.
  • Mixing ratio must be accurate, recommend mixing ratio is A:B=100:2~3(by weight), If curing too fast, please reduce the ratio of catalyst to 1% or less, then Stir Part A and Part B completely.
  • Use a vacuum to de-gas this product before use under pressure. Vacuum silicone for 2-3 minutes
  • This product has a limited shelf life. Use it as soon as possible after opening.
  • Always tightly reseal containers after use. Air, moisture or other contamination causes a reduction in reactivity over time.

Package

Storage & shelf-life

12 months in unopened containers when properly stored.

Super-Silicon cannot guarantee the shelf life of opened or repackaged units.
Recommended storage temperature range: 10°C – 25°C. SuperSilicon™ should be stored in closed containers out of direct sunlight and away from direct sources of heat. Always tightly reseal containers after use. Air, moisture or other contamination causes a reduction in reactivity over time.

ProductsDescription
Thickening agentFor Thickening silicone for brushable application
Fumed silicaA fine powder that can be added to polyurethane and silicone liquid rubber to thicken them for brush-on/lay-up applications.
Tin Cure Silicone AcceleratorFor speed up curing time
Heat resistance additiveFor resisting chemical/heat burnout
Pigments For coloring silicone
FabricReinforcement Material for silicone molds
Release agent

Related Applications

Silicone rubber mold for plaster Ornamentation

Plaster Ornamentation

Plaster Ornamentation For casting statuary, home decor items, ornamental moldings, and decorative millwork. Silicone rubbers work very well for plaster casting, capture excellent surface detail, offer exceptional dimensional stability and have unmatched lifetime and durability Previous Next Recommended options Edit Table

Read More »
SuperSil Silicone mold rubber41

Concrete Casting

Concrete casting Make your own concrete molds, forms, texture and stamping mats Cast stone veneer / Artifical stone These two-component mold rubbers capture excellent surface detail, offer exceptional dimensional stability and have unmatched lifetime and durability Recommended options Edit Table Previous Next Making form liners These detailed liners are often used to cast decorative concrete

Read More »
Contacts
Get a Free Sample, Contact Us Now
Scroll to Top