2:1 Deep Pour Epoxy Resin (EPOX-21)
100% Solid, VOCs Free, UV Stable, Non toxic
Slow epoxy exothermic reaction.
Package
A 2kg + B 1kg = 3kg/set
A 10kg + B 5kg = 15kg/set
A 20kg + B 10kg = 30kg/set
Descriptions
2:1 Deep pour epoxy resin EPOX-21 is a clear casting epoxy resin specially formulated for deep pour casting, encapsulating, and moulding projects with a pouring depth of 4~7 cm in a single pour. Excellent anti-foam and air-release properties. UV resistant formula, anti-yellowing. This deep pour epoxy allows you to pour large deep pours with very low heat build-up (exothermic reaction).
Our Deep Pour 21 is the newest version of Super clear and is the EASIEST WOODWORKING EPOXY RESIN on the market! This is the clearest curing, best UV resistant clear thick casting pourable epoxy resin system out there!
Key features
✔SINGLE 2” POURS: No more days and days of pouring multiple thin layers and no sanding between coats is needed
✔CRYSTAL CLEAR POURS: Crystal clear thick pour epoxy perfect for clear river tables and clear object castings.
✔FLAWLESS COLORANT MIXING: River tables, wood voids, art object castings, and pen turning blocks will have
gorgeous effects with colorants
✔LONG WORK TIME: Slow exothermic reaction allows excess heat to efficiently escape preventing cracks as it cures.
✔HIGHEST EPOXY RESIN UV PROTECTION: Added UV Inhibitors resist yellowing from Ultra Violet light sources
✔Easy to use, 2:1 by volume mix ratio
Applications
2:1 Deep Pour Amazing Epoxy is PERFECTLY FORMULATED for:
⚫ Epoxy Resin River Table
⚫ Epoxy Resin Barn Doors
⚫ Cavity Pours
⚫ Restorations
⚫ Commercial
⚫ DIY
Instructions
⚫ Easily mix a proper ratio of Base Resin A-Side with the B Side Curing Agent.
⚫ Pour Each side into a separate cup, then combine it in a third mixing container.
⚫ Mix the contents for a MINIMUM of 3 minutes, but 5 minutes is the recommended time to mix.
⚫ Working time is 1 hour at 77 degrees Fahrenheit, giving you plenty of time to perfectly mix your epoxy resin
pigment powder to create a colored epoxy for wood.
⚫ Cure time is longer, which enables a thicker pour with a bubble-free tough, durable, wet gloss, beautifully
crystal clear epoxy resin finish!
⚫ Total cure time: 24-72 hrs.
⚫ To get rid of surface bubbles, use a heat source (heat gun, blow torch).
Storage & shelf-life
12 months, should be stored in original, unopened containers under 25 Degrees C.
Always tightly reseal containers after use. Air, moisture, or other contamination causes a reduction in reactivity over time, out of direct sunlight and away from direct sources of heat.
CAUTIONS
Avoid breathing fumes – use in a well-ventilated area at a minimum. NIOSH approved respirator is recommended.
Wear safety glasses, long sleeves and rubber gloves to minimize skin contact.
Materials should be stored and used in a room temperature environment (25 Degrees C). Elevated temperatures will reduce Pot Life. Resin and Hardener must be properly measured and thoroughly mixed to achieve full, high-strength,solid-cure properties. Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if the performance of this material is in question.
